D-Link DCF-660W Quick Installation Guide - Page 4

Configuring the DCF-660W Wireless Settings • After resetting the PDA, the DCF-660W Compact Flash Adapter will finalize its driver installation and the Settings screen (Fig. 2.1) will appear. This section allows users to set the IP address released from the Wireless Router or Access Point. • If the Settings screen does not appear, go to Start > Settings > Connections and select on IP Address icon tab. Select Use serverassigned IP (dynamic IP) address via DHCP or assign a specific IP address (static IP) and click ok. Check to see if the Wireless Router or Access Point has a DHCP server built in. If DHCP server is not available, select "Use specific IP address" and enter in the proper Static IP address, Subnet mask and Default gateway information to access the Wireless router or Access Point. Fig. 3.1 • By default the DCF-660W is set to "Use server-assigned IP address." • To configure the SSID (Service Set Identifier) and Network Type, go to Start > Settings > select System tab > click on DCF-660W CF Card icon. Fig. 3.2 4