D-Link DCH-S161 Datasheet - Page 1

D-Link DCH-S161 Manual

Page 1 highlights

DCH-S161 Wi-Fi Water Sensor Product Highlights Water Detection Alerts A push notification when water is detected1 Battery Powered Lasts up to 1.5 years on 2 AA batteries2 Smart Home Compatible Works with mydlink Smart Home Devices, the Google Assistant and IFTTT3 Protect Your Home The DCH-S161 Wi-Fi Water Sensor is a wireless sensor that helps keep your home safe. You can install the probe anywhere and it will help you detect water leaks before it turns into serious damage. If the water sensor is triggered, a 90 dB alarm will sound and an LED will blink to give you audio and visual warnings. Push notifications to your mobile device let you keep tabs on your home on the go. You can also receive audio alerts from your Google Assistant so that you can know about a water leak even if you are too far away to hear the alarm on the water sensor. Easy to Set Up The DCH-S161 can be set up easily via the free mydlinkTM app4. Simply download and install the app on your mobile device and follow the step-by-step instructions to quickly configure the sensor. The DCH-S161 connects to your existing Wi-Fi router, no hub required. In addition, you can configure policies to trigger other connected home devices whenever the DCH-S161 detects water. Specially Designed Detection Cable The water detection sensor supplied with the DCH-S161 is designed specifically to detect water on contact. When water is detected, the sensor will trigger both an alarm siren and an alarm LED so you can both hear and see the warning. The sensor is at the end of a 1.8 m (5.9 ft) cable, allowing you to place the sensor anywhere that's convenient. Access Anywhere Using the Mobile App When water is detected the mydlinkTM app sends push notifications to your mobile device no matter where you are. With push notifications, you can rest assured that you are always aware of any problems so you can act fast. Features ♦♦ Compatible with the Google Assistant and IFTTT ♦♦ Get audio alerts from your Google Assistant ♦♦ 90 decibel siren ♦♦ Wireless 802.11n/g compatibility ♦♦ WPA/WPA2 wireless encryption ♦♦ mydlinkTM app integration ♦♦ Firmware Over The Air (FOTA) ♦♦ Low battery notification ♦♦ 1.8 m (5.9 ft) cable for water detector

  • 1
  • 2
  • 3

Wi-Fi Water Sensor
DCH-S161
Product Highlights
Features
Protect Your Home
The DCH-S161 Wi-Fi Water Sensor is a wireless sensor that helps keep your home safe. You can install the
probe anywhere and it will help you detect water leaks before it turns into serious damage. If the water
sensor is triggered, a 90 dB alarm will sound and an LED will blink to give you audio and visual warnings.
Push notifications to your mobile device let you keep tabs on your home on the go. You can also receive
audio alerts from your Google Assistant so that you can know about a water leak even if you are too far
away to hear the alarm on the water sensor.
Easy to Set Up
The DCH-S161 can be set up easily via the free mydlink
TM
app
4
. Simply download and install the app
on your mobile device and follow the step-by-step instructions to quickly configure the sensor. The
DCH-S161 connects to your existing Wi-Fi router, no hub required. In addition, you can configure policies
to trigger other connected home devices whenever the DCH-S161 detects water.
Specially Designed Detection Cable
The water detection sensor supplied with the DCH-S161 is designed specifically to detect water on
contact. When water is detected, the sensor will trigger both an alarm siren and an alarm LED so you can
both hear and see the warning. The sensor is at the end of a 1.8 m (5.9 ft) cable, allowing you to place the
sensor anywhere that’s convenient.
Access Anywhere Using the Mobile App
When water is detected the mydlink
TM
app sends push notifications to your mobile device no matter
where you are. With push notifications, you can rest assured that you are always aware of any problems
so you can act fast.
Compatible with the Google
Assistant and IFTTT
Get audio alerts from your Google
Assistant
90 decibel siren
Wireless 802.11n/g compatibility
WPA/WPA2 wireless encryption
mydlink
TM
app integration
Firmware Over The Air (FOTA)
Low battery notification
1.8 m (5.9 ft) cable for water detector
Water Detection Alerts
A push notification when water is
detected
1
Battery Powered
Lasts up to 1.5 years on 2 AA
batteries
2
Smart Home Compatible
Works with mydlink Smart Home
Devices, the Google Assistant and
IFTTT
3