D-Link DCS-2332L User Manual - Page 15

Section 1: Product Overview Optional: WPS Wireless Connection Alternatively, if your router supports WPS, you can use the WPS button on the camera to easily create a secure wireless connection to your network. To create a WPS connection: Step 1 Attach the Antenna Locate the antenna included with your DCS-2332L, and attach it to the antenna connector located on the side of the DCS-2332L. Step 2 Press and hold the WPS button for approximately 5-6 seconds. The blue WPS status LED on the front panel will blink. Step 3 Within 60 seconds press the WPS button on your router. On some routers, you may need to log in to the web interface and click on an on-screen button to activate the WPS feature. If you are not sure where the WPS button is on your router, please refer to your router's User Manual. The DCS-2332L will automatically create a wireless connection to your router. While connecting, the status LED will flash. When the connection process is complete, the status LED will turn solid. Note: If your router does not support WPS, you can still use the wired connection method on the previous page. After Zero Configuration setup is complete, your router's wireless settings will be automatically transferred to the camera. D-Link DCS-2332L User Manual 1 WPS Button 2 ATE 15