D-Link DCS-2530L User Manual - Page 29
Enable UPnP, Presentation, Enable UPnP Port, Forwarding, Enable PPPoE, User Name, Password - rtsp
View all D-Link DCS-2530L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Section 3: Configuration Enable UPnP Enabling this setting allows your camera to be configured as a UPnP Presentation: device on your network. Enable UPnP Port Enabling this setting allows the camera to add port forwarding entries Forwarding: into the router automatically on a UPnP capable network. Enable PPPoE: Enable this setting if your network uses PPPoE. User Name / Enter the username and password for your PPPoE account. Re-enter your Password: password in the Confirm Password field. You may obtain this information from your ISP. HTTP Port: Enter the port to use for HTTP access to the camera. The default port number is 80. Access Name for Enter a name to use for HTTP streaming access. The default name is Stream 1~3: video#.mjpeg, where # is the number of the stream. HTTPS Port: Enter the port to use for HTTPS access to the camera. You may use a PC with a secure browser to connect to the HTTPS port of the camera. The default port number is 443. RTSP Port: Enter the port number to use for RTSP streaming to mobile devices. The default port number is 554. You may specify the address of a particular stream. For instance, live1.sdp can be accessed at rtsp://x.x.x.x/live1.sdp where the x.x.x.x represents the IP address of your camera. Enable CoS: Enabling CoS allows you to specify the Class of Service for different types of traffic so you can prioritize their transmission on your network. CoS helps provide prioritization for Layer 2 traffic. D-Link DCS-2530L User Manual 29