D-Link DCS-3415 User Manual - Page 62
RS485
UPC - 790069313752
View all D-Link DCS-3415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Section 4 - Configuration RS485 With digital PTZ (Pan/Tilt/Zoom) feature enabled, it is possible to zoom in and out video recieved from the DCS-3415. Enable PTZ Operation To utilize this feature, please connect DCS-3415 to a PTZ scanner via RS485 interface and follow the instructions given below. The DCS-3415 offers three PTZ drivers: DynaDome/SmartDOME Lilin PIH-7x00 Pelco D protocol Note: If none of the above PTZ drivers is supported by your PTZ scanner, please select Custom camera. 1. Connect to your PTZ scanner, set the Camera ID, PTZ driver and Port settings. 2. Select Enable PTZ Operation and then click Save to take effect. 3. The PTZ control buttons will be displayed in the main page. Preset Position Click Preset Position to set the preset position for the Network Camera. A total of 20 preset positions can be configured. To set a preset position, follow the steps given below: 1. Adjust the Network Camera to a desired position using the buttons on the right side of the window. 2. In the Preset position name text box, enter a descriptive name for the preset position. You can enter up to forty characters in the text box. 3. Click Add. The preset position name will appear in the drop-down list. To remove a preset position from the list, select a preset position name from the drop-down list and then click Delete. D-Link DCS-3415 User Manual 62