D-Link DCS-4633EV Quick Install Guide - Page 10
Using the DCS-37-1 Mount optional
View all D-Link DCS-4633EV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
ENGLISH Using the DCS-37-1 Mount (optional) Place the DCS-37-1 mounting sticker in the desired location, then use a 6 mm drill bit to drill the required holes 25 mm deep and insert the wall anchors into the holes. If you plan to pass cables through the wall, you will also need to drill a hole for the cable channel. Note: The camera in the corresponding graphics may be different from your product, but the basic process is the same. Use the provided screws to mount the DCS-37-1 to the wall. Guide the camera connectors through the back or bottom cable channel on the DCS-37-1. Then screw the mounting plate to the bracket using the set of mounting holes marked B. Remove the cover from the camera. Use the provided screws to mount the camera to the DCS-37-1, then adjust the angle and rotation of the camera as desired using the tilt lock screw. Attach the camera cover. If you are passing the camera cables through the wall, place the rubber stopper into the bottom cable channel on the mount to seal it. 8 D-Link DCS-4633EV Quick Installation Guide