D-Link DCS-4703E User Manual - Page 25
Network Setup, IPv4 Address, Subnet Mask, Default Router, Optional Primary DNS, Save Settings
View all D-Link DCS-4703E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Section 3: Configuration Network Setup Use this section to configure the network connections for your camera. All relevant information must be entered accurately. After making any changes, click the Save Settings button to save your changes. LAN Settings: This section lets you configure settings for your local area network. DHCP: Select this connection if you have a DHCP server running on your network and would like your camera to obtain an IP address automatically. If you choose DHCP, you do not need to fill out the IP address settings. Static IP Client: You may obtain a static or fixed IP address and other network information from your network administrator for your camera. IPv4 Address: Enter the IP address that the camera will use on your network. You may need to get this information from your ISP or network administrator. Subnet Mask: The default value is "255.255.255.0." Used to determine if the destination is part of the same subnet. Default Router: The router used to forward frames to destinations in a different subnet. Invalid router settings may cause the failure of transmissions to a different subnet. Optional Primary DNS: Primary domain name server that translates names to IP addresses. Optional Secondary DNS: Secondary domain name server to backup the Primary DNS. Enable UPnP Enabling this setting allows your camera to be configured as a UPnP device Presentation: on your network. D-Link DCS-4703E User Manual 25