D-Link DCS-6620G Product Manual - Page 39
Configuration > Advanced > Network, General Settings, Streaming Settings - d link reset
UPC - 790069277085
View all D-Link DCS-6620G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
DCS-6620G User's Manual Using the DCS-6620G with an Internet Browser Configuration > Advanced > Network (continued) Reset IP Address at next boot Once the DCS-6620G is configured, this box should be unchecked at all times. If the box has been checked and the connection is lost, run Installation Wizard to find the camera's IP address. General Settings IP address: Subnet mask: Default router: Primary DNS: Secondary DNS: Necessary for network identification. Used to determine if the destination is in the same subnet. The default value is "255.255.255.0." The router used to forward frames to destinations in a different subnet. Invalid router settings may cause the failure of transmissions to a different subnet. Primary domain name server that translates names to IP addresses. Secondary domain name server to backup the primary one. HTTP Settings HTTP Port: Can be set to other than the default port 80. When the administrator changes the HTTP port of the DCS-6620G (which has an IP address of 192.168.0.120) from 80 to 8080, users must type http://192.168.0.100:8080 in the Web browser bar. Streaming Settings UDP Video channel port: UDP Audio channel port: Can be set to other than the default port 5002 to correspond with the port opened by the firewall Can be set to other than the default port 5003 to correspond with the port opened by the firewall. D-Link Systems, Inc. 39