D-Link DCS-8300LH User Manual - Page 13
Mounting the Camera
View all D-Link DCS-8300LH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Section 2 - Installation Mounting the Camera 1/ Rotate the mounting bracket counter-clockwise and remove it from the bottom of the device. 2/ Place the mounting bracket where you want to position the camera and use a pencil to mark the holes. You can use the lower holes for a removable installation, or the top holes for a fixed one. Make sure that the arrow on the baseplate is pointing up. 3/ Using a 6 mm drill bit, drill two 25 mm deep holes over the pencil marks. For a plaster, drywall, or concrete wall, insert the plastic anchors to support the screws first. D-Link DCS-8300LH User Manual 10
10
D-Link DCS-8300LH User Manual
Section 2 - Installation
Mounting the Camera
Rotate the mounting bracket counter-clockwise and remove it from
the bottom of the device.
1
/
Place the mounting bracket where you want to position the camera
and use a pencil to mark the holes. You can use the lower holes for
a removable installation, or the top holes for a fixed one. Make sure
that the arrow on the baseplate is pointing up.
2
/
Using a 6 mm drill bit, drill two 25 mm deep holes over the pencil
marks. For a plaster, drywall, or concrete wall, insert the plastic
anchors to support the screws first.
3
/