D-Link DCS-8600LH User Manual - Page 17

Section 3 - mydlink 1 Device Photo Tap to add a customized photo of this device. 2 Device Name Tap to change the device's name. 3 Device Location Tap to change or add a new location for this device. 4 Time Zone Select the time zone to calibrate your device to. Tap to change the wireless network this device will use to connect 5 Wi-Fi to the Internet. Note: The network must be the same as all your other mydlink devices that you wish to use the same account for. 6 Designated Contact Tap here to add, remove, or edit designated contacts that appear in the rich notification. 7 Camera Microphone Tap to enable or disable picking up sound near your camera in live view and recordings. 8 Motion Setting Tap to further configure sensitivity and the active area of motion detection for the camera. 9 Night Vision Tap to change night vision detection to On, Off or Auto. 10 Anti-Flicker Reduces flicker in the video. Tap 50 Hz or 60 Hz depending on the frequency of your lights. 11 Enable Camera LED Disabling this will turn off the LED until you turn it back on. 12 Privacy Mode Tap to enable. Privacy mode will disable the camera feed. 13 Invert Image Enable this to invert the camera view. Tap to change video clips storage location from the microSD card to 14 Storage the cloud. You can also subscribe to mydlink Cloud from here and view your current subscription plan. 15 Firmware Update Shows time of auto firmware update. Tap to enter the update settings. You can choose the most suitable time for automatic updates. 16 Current Firmware Version This displays the installed version of the firmware on your device. 17 Device ID Identifies the device for support issues. 18 Remove Device Tap this button to disconnect this device from your mydlink account. D-Link DCS-8600LH User Manual 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 14