D-Link DCS-900W Product Manual - Page 20
Camera Name, Location, IP Assignment, Manually Assign, Assign Automatically Using - camera manual
UPC - 588888888885
View all D-Link DCS-900W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
DCS-900W Configuration (continued) Advanced > System Camera Name: This field is used for entering a descriptive name for the camera. The default setting for the Camera Name is DCS-900W. The maximum length is 32 characters (Printable ASCII). Location: This field is used for entering a descriptive name for the location used by the DCS900W. IP Assignment: Important Information Access to the Internet Camera is gained by assigning a proper IP Address. Please make sure to use a vacant IP address when you assign the IP Address for the Internet Camera. This will prevent IP Address conflicts. There are two options to select from the IP Assignment, either Manually Assign or Assign Automatically Using. Manually Assign You can click Manually Assign and directly enter a valid IP Address for your camera. Remember that your camera's IP Address must correspond to your network settings if you wish to change it here. The default settings are as follows: Default IP - 192.168.0.20 Subnet Mask - 255.255.255.0 Default Gateway - 0.0.0.0 20