D-Link DES-1008F User Guide - Page 19

A. 10BASE-T Hub For a 10BASE-T hub, the DES-1008D LED indicators should light up as the following: "Full-Duplex/Collision" indicator is OFF. "100LINK/ACT,10LINK/ACT LED" indicator is light amber. B. 100BASE-TX Hub For a 100BASE-TX hub, the DES-1008D LED indicators should light up as the following: "Full-Duplex/Collision" LED indicator is OFF. "100LINK/ACT,10LINK/ACT" LED indicator is light green. Hub without Uplink (MDI-II) port If a hub is not equipped with an uplink (MDI-II) port, connection can be made using either straight cable or crossover cable. A. Using straight cable When using straight cable, the connection can be made from the uplink (MDI-II) port of the DES-1008D to any port of the hub. B. Using crossover cable When using crossover cable, the connection can be made from any (MDI-X) ports of the DES-1008D to any port of the Hub. DES-1008D to switch (other devices) The DES-1008D can be connected to another switch or other devices (routers, bridges, etc.) via a two-pair Category 3, 4, 5 UTP/STP straight or crossover cable. 11