D-Link DES-1024D Manual - Page 6

port 10/100BASE Ethernet Switch with RJ-45 connectors - des switch

Page 6 highlights

Switching LAN technology is a marked improvement over the previous generation of network hubs and bridges, which were characterized by higher latencies. Routers have also been used to segment local area networks, but the cost of a router, the setup and maintenance required, make routers relatively impractical. Today switches are an ideal solution to most kinds of local area network congestion problems. Features The DES-1024D is a high-performance switch designed specifically for environments where traffic on the network and the number of users increase continuously. „ 24-port 10/100BASE Ethernet Switch with RJ-45 connectors „ Supports Auto-negotiation of speed and duplex modes for each port „ Supports Auto-MDI/MDI-X on each port, eliminating the need for cross over cables or uplink ports „ Wire-speed reception and transmission „ Store-and-Forward switching method „ Integrated address Look-Up Engine, supports 8K MAC addresses „ Supports 2.5Mbps RAM for data buffering „ Front-panel diagnostic LEDs „ Broadcast storm protection „ IEEE 802.3x flow control for full-duplex „ Back pressure flow control for half-duplex 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17

4
Switching LAN technology is a marked improvement over the previous
generation of network hubs and bridges, which were characterized by higher
latencies. Routers have also been used to segment local area networks, but
the cost of a router, the setup and maintenance required, make routers
relatively impractical. Today switches are an ideal solution to most kinds of
local area network congestion problems.
Features
The DES-1024D is a high-performance switch designed specifically for
environments where traffic on the network and the number of users increase
continuously.
24-port 10/100BASE Ethernet Switch with RJ-45 connectors
Supports Auto-negotiation of speed and duplex modes for
each port
Supports Auto-MDI/MDI-X on each port, eliminating the
need for cross over cables or uplink ports
Wire-speed reception and transmission
Store-and-Forward switching method
Integrated address Look-Up Engine, supports 8K MAC
addresses
Supports 2.5Mbps RAM for data buffering
Front-panel diagnostic LEDs
Broadcast storm protection
IEEE 802.3x flow control for full-duplex
Back pressure flow control for half-duplex