D-Link DFE-690TXD Product Manual - Page 19
Statically Assign an IP address
UPC - 790069235504
View all D-Link DFE-690TXD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Appendix A - Networking Basics Statically Assign an IP address If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below: Step 1 Windows® 2000/XP: Click on Start > Settings > Control Panel > Network Connections. Windows Vista®: Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections. Windows® 7: Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Change Adaper Settings. Step 2 Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. Step 3 Highlight Internet Protocol (TCP/IP) and click Properties. Step 4 Click Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP address on your router. Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 254. Make sure that the number you choose is not in use on the network. Set the Default Gateway the same as the LAN IP address of your router (192.168.0.1). Set the DNS server address provided by your ISP. Step 5 Click OK twice to save your settings. D-Link DFE-690TXD User Manual 19