D-Link DFL-210-WCF-12 Product Manual - Page 342
NAT Pools, Objects > Address Book > Add > IP address
UPC - 790069601545
View all D-Link DFL-210-WCF-12 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 342 highlights
7.3. NAT Pools Chapter 7. Address Translation This example creates a NAT pool with the external IP address range 10.6.13.10 to 10.16.13.15 which is then used in a NAT IP rule for HTTP traffic on the wan interface. Web Interface A. First create an object in the address book for the address range: 1. Go to Objects > Address Book > Add > IP address 2. Specify a suitable name for the IP range nat_pool_range 3. Enter 10.6.13.10-10.16.13.15 in the IP Address textbox (a network such as 10.6.13.0/24 could be used here - the 0 and 255 addresses will be automatically removed) 4. Click OK B. Next create a stateful NAT Pool object called stateful_natpool : 1. Go to Objects > NAT Pools > Add > NAT Pool 2. Now enter: • Name: stateful_natpool • Pool type: stateful • IP Range: nat_pool_range 3. Select the Proxy ARP tab and add the WAN interface 4. Click OK C. Now define the NAT rule in the IP rule set 1. Go to Rules > IP Rules > Add > IP Rule 2. Under General enter: • Name: Enter a suitable name such as nat_pool_rule • Action: NAT 3. Under Address filter enter: • Source Interface: int • Source Network: int-net • Destination Interface: wan • Destination Network: all-nets • Service: HTTP 4. Select the NAT tab and enter: • Check the Use NAT Pool option • Select stateful_natpool from the drop-down list 5. Click OK 342