D-Link DFL-260E CLI Guide for DFL-260E - Page 53

Source TCP/UDP port filter.

Page 53 highlights

2.2.40. pipes Chapter 2. Command Reference -ipdest= -ipsrc= -ipversion= -out -out-nocap -port= -promisc -proto= -show -size= -snaplen= -srcport= -start -status -stop -tcp -udp -wipe -write Destination IP address filter. Source IP address filter. IP version filter. Realtime packet brief dumped to console. Unbuffered (not stored in memory) realtime packet brief dumped to console. TCP/UDP port filter. Set iface in promiscuous mode. IP protocol filter. Show a captured packets brief. Size (kb) of buffer to store captured packets in memory (default 512kb). Maximum length of each packet to capture. Source TCP/UDP port filter. Start capture. Show capture status. Stop capture. TCP filter. UDP filter. Remove all captured packets from memory. Write the captured packets to disk. Name of interface(s). Note Requires Administrator privilege. 2.2.40. pipes Show pipes information. Description Show list of configured pipes / pipe details / pipe users. Note: The "pipes" command is not executed right away; it is queued until the end of the second, when pipe values are calculated. Usage 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198

-ipdest=<IP4 Address>
Destination IP address filter.
-ipsrc=<IP4 Address>
Source IP address filter.
-ipversion=<1...15>
IP version filter.
-out
Realtime packet brief dumped to console.
-out-nocap
Unbuffered (not stored in memory) realtime packet
brief dumped to console.
-port=<0...65535>
TCP/UDP port filter.
-promisc
Set iface in promiscuous mode.
-proto=<0...255>
IP protocol filter.
-show
Show a captured packets brief.
-size=<value>
Size (kb) of buffer to store captured packets in
memory (default 512kb).
-snaplen=<value>
Maximum length of each packet to capture.
-srcport=<0...65535>
Source TCP/UDP port filter.
-start
Start capture.
-status
Show capture status.
-stop
Stop capture.
-tcp
TCP filter.
-udp
UDP filter.
-wipe
Remove all captured packets from memory.
-write
Write the captured packets to disk.
<interface(s)>
Name of interface(s).
Note
Requires Administrator privilege.
2.2.40. pipes
Show pipes information.
Description
Show list of configured pipes / pipe details / pipe users.
Note: The "pipes" command is not executed right away; it is queued until the end of the second,
when pipe values are calculated.
Usage
2.2.40. pipes
Chapter 2. Command Reference
53