D-Link DFL-80 User Manual - Page 78
Adding a DMZ To External Policy
View all D-Link DFL-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Adding a DMZ To External Policy: Step 1: Click the New Entry button and the Add New Policy window will appear. Step 2: Source Address: Select the name of the DMZ network from the drop down list. The drop down list will contain names of DMZ networks defined in DMZ section of the Address menu. To add a new source address, please go to the DMZ section under the Address menu. Destination Address: Select the name of the external network from the drop down list. The drop down list lists names of addresses defined in External section of the Address menu. To add a new destination address, please go to External section of the Address menu. Service: Select a service from drop down list. The drop down list will contain services defined in the Custom or Group section under the Service menu. These are services/application that are allowed to pass from the DMZl network to the External network. Choose ANY for all services. To add or modify these services, please go to the Service menu. Action: Select Permit or Deny from the drop down list to allow or reject the packets travelling from the specified DMZ network to the external network. Logging: Select Enable to enable flow monitoring. Statistics: Click Enable to enable flow statistics. Alarm Threshold: set a maximum flow rate (in Kbytes/Sec). An alarm will be sent if the flow rate exceeds the specified value. Step 3: Click OK to add new policy or click Cancel to cancel adding. 78