D-Link DFL-800 Product Manual - Page 202
IGMP Rules Configuration - Address Translation,
UPC - 790069282133
View all D-Link DFL-800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 202 highlights
4.6.3. IGMP Configuration Chapter 4. Routing 4.6.3.2. IGMP Rules Configuration - Address Translation The following examples illustrates the IGMP rules needed to configure IGMP according to the Address Translation scenario described above in Section 4.6.2.2, "Multicast Forwarding - Address Translation Scenario". We need two IGMP report rules, one for each client interface. The interface if1 uses no address translation and if2 translates the multicast group to 237.192.10.0/24. We also need two query rules, one for the translated address and interface, and one for the original address towards if1. Two examples are provided, one for each pair of report and query rule. The upstream multicast router uses IP UpstreamRouterIP. Example 4.15. if1 Configuration The following steps needs to be executed to create the report and query rule pair for if1 which uses no address translation. Web Interface A. Create the first IGMP Rule: 1. Go to Routing > IGMP > IGMP Rules > Add > IGMP Rule 2. Under General enter: • Name: A suitable name for the rule, for example Reports_if1 • Type: Report • Action: Proxy • Output: wan (this is the relay interface) 3. Under Address Filter enter: • Source Interface: if1 • Source Network: if1net • Destination Interface: core • Destination Network: auto • Multicast Source: 192.168.10.1 • Multicast Group: 239.192.10.0/24 4. Click OK B. Create the second IGMP Rule: 1. Again go to Routing > IGMP > IGMP Rules > Add > IGMP Rule 2. Under General enter: • Name: A suitable name for the rule, for example Queries_if1 • Type: Query • Action: Proxy • Output: if1 (this is the relay interface) 3. Under Address Filter enter: • Source Interface: wan • Source Network: UpstreamRouterIp • Destination Interface: core 202