D-Link DFL-M510 User Manual - Page 116

DFL-M510 Getting Started Once you have accessed the Command Line Interface (CLI) with a terminal connection, press any key and the following prompt will appear. Enter the user name and password: the default user name is admin, the default password is admin. Welcome to D-Link DFL-M510 Console Environment Copyright (C) 2005 D-Link Corp. DFL-M510 login: CLI Command List You can use the console or SSH to connect the DFL-M510. After login, you can use the CLI commands to configure the DFL-M510. The complete CLI commands are described as follows. Commands help get set history exit reboot reset ping Description Getting information of all command's usage and argument configuration Display all kinds of configuration information of the DFL-M510the DFL- M510 Set the system paramter Display all commands which you have used Exit command shell Reboot system Reset system configuration to default settings, type "y" to load default setting. Send ICMP echo request messages Help Command Help is used for getting information of other command's usage and argument configuration. Main command help Sub command get set history exit reboot reset ping Example help get help set help history help exit help reboot help reset help ping Command description Display all information of "get" command. Display all information of "set" command. Display all information of "help" command Display all information of "exit" command Display all information of "reboot" command Display all information of "reset" command Display all information of "ping" command EXAMPLE (A) help get >> help get get - Get system parameters. Available commands system - System configurations, including IP, password and etc. time - Device clock setting state - Device operation state interface - Device interface configuration 106 -- Appendix A: The Command Line Interface