D-Link DGS-1210-52MP Reference Guide - Page 92
D-Link Green Technology, VLAN, QoS (Quality of Service), Security, Management
View all D-Link DGS-1210-52MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Appendix B - Technical Specifications D-Link Web Smart Switch User Manual LLDP L2 Multicast Filtering D-Link Green Technology Power Saving: Enabled by default to save power: - By Link Status: Drastically save power when the switch port link is down. For example, no PC connection or the connected PC is powered off. - By Cable Length: Detects the length of connected RJ-45 cables and adjusts power usage accordingly without affecting performance. Once the RJ-45 connection is less than 20 meters, the switch will reduce the power instead of full power, which is only needed for 100 meters cables. - By LED Shut-Off: LEDs can be turned on/off by port or system through schedule. - By Port Shut-Off: Each port on the system can be turned on/off by schedule. - By Port Standby: Each port on the system enters sleep state by schedule. - By System Hibernation: System enters hibernation by schedule. In this mode, switches save most power since main chipsets (both MAC and PHY) are disabled for all ports, and energy required to power the CPU is minimal. VLAN 802.1Q VLAN standard (VLAN Tagging) Up to 256 static VLAN groups Asymmetric VLAN Management VLAN Auto-Voice VLAN Auto Surveillance VLAN QoS (Quality of Service) 802.1p priority, DSCP priority queue mapping Up to 4 queues per port Supports Strict / WRR mode in queue handling Bandwidth Control AAA 802.1X RADIUS server 802.1X port-based access control Support different ACL contents: - MAC address - Ethernet Type - IPv4 address - ICMP - IGMP - TCP/UDP port number policy packet Security Trusted Host Port Security:Support 64 MAC addresses per port Traffic Segmentation D-Link Safeguard Engine Broadcast Storm Control ARP Spoofing Prevention: Supports max 64 entries DHCP Server Screening: Able to configure 5 IP addresses for DHCP server. SSL: Support v1/v2/v3 Smart Binding - Support manual configuration and scanning for binding. - Supports ARP packet inspection as default, ARP and IP packet inspection as an option. - Supports DHCP Snooping Management Web-based GUI or SmartConsole Utility D-Link proprietary CLI SNMP support DHCP client Trap setting for destination IP, system events, fiber port events, twisted-pair port events Password access control Web-based configuration backup / restoration Web-based firmware backup/restore Firmware upgrade using SmartConsole Utility & Web-based management Reset, Reboot ACL Max 50 ingress ACL profiles Ingress ACL rules: - DGS-1210-20/28/28P: 200 rules (each rule can be associated to a single port or multiple ports) - DGS-1210-52: 450 rules 87