D-Link DGS-1500-28 User Manual - Page 23

Device List, Monitor, IP Address, Protocol version, Product Name, System Name, Location, Trap IP

Page 23 highlights

4 SmartConsole Utility D-Link Web Smart Switch User Manual Figure 4.11 - SmartConsole Add device Figure 4.12 - SmartConsole Delete device Device List This list displays all discovered Web-Smart devices on the network. Figure 4.13 - SmartConsole Device List Definitions of the Device List features: Monitor: Checking the Monitor box and the SmartConsole will collect the trap and log data from the device. The in the monitor means the device was discovered by SmartConsole. Click the icon to have the device to continue updating the information, such as system log or trap to the SmartConsole Utility. The icon will appear . When the device was detected as not reachable, the icon will change to power or the cable of this device is disconnected. . Please check if the IP Address: Displays the current IP addresses of devices. MAC Address: Displays the device MAC Addresses. Protocol version: Displays the software version of the Utility. Product Name: Displays the device product name. System Name: Displays the appointed device system name. DHCP: Specify if the device gets the IP address from a DHCP server. Location: Displays the location of the appointed device. Trap IP: Displays the IP address of the host where the Trap information will be sent. Subnet Mask: Displays the Subnet Mask setting of the device. Gateway: Displays the Gateway setting of the device. Device Group Interval: Displays the intervals (in seconds) that the Switch will be discovered in the SmartConsole Device List 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115

4
SmartConsole Utility
D-Link Web Smart Switch User Manual
17
Figure 4.11 – SmartConsole Add device
Figure 4.12 – SmartConsole Delete device
Device List
This list displays all discovered Web-Smart devices on the network.
Figure 4.13 – SmartConsole Device List
Definitions of the Device List features:
Monitor:
Checking the Monitor box and the SmartConsole will collect the trap and log data from the device.
The
in the monitor means the device was discovered by SmartConsole. Click the icon to have the device
to continue updating the information, such as system log or trap to the SmartConsole Utility. The icon will
appear
. When the device was detected as not reachable, the icon will change to
. Please check if the
power or the cable of this device is disconnected.
IP Address:
Displays the current IP addresses of devices.
MAC Address:
Displays the device MAC Addresses.
Protocol version:
Displays the software version of the Utility.
Product Name:
Displays the device product name.
System Name:
Displays the appointed device system name.
DHCP:
Specify if the device gets the IP address from a DHCP server.
Location:
Displays the location of the appointed device.
Trap IP:
Displays the IP address of the host where the Trap information will be sent.
Subnet Mask:
Displays the Subnet Mask setting of the device.
Gateway:
Displays the Gateway setting of the device.
Device Group Interval:
Displays the intervals (in seconds) that the Switch will be discovered in the
SmartConsole Device List