D-Link DGS-3324SR Product Manual - Page 157
Initializing Ports for Port Based 802.1x, Initialize Port window, Parameter
UPC - 790069262067
View all D-Link DGS-3324SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
xStack DGS/DXS-3300 Series Layer 3 Stackable Gigabit Ethernet Switch User Manual Initializing Ports for Port Based 802.1x Existing 802.1x port and MAC settings are displayed and can be configured using the window below. Click Port Access Entity > PAE System Control > Initialize Port(s) to open the following window: Figure 6- 106. Initialize Port window This window allows initialization of a port or group of ports. The Initialize Port Table in the bottom half of the window displays the current status of the port(s). This window displays the following information: Parameter Description Unit Choose the Switch ID number of the Switch in the switch stack to be modified. From and To Select ports to be initialized. Port A read-only field indicating a port on the Switch. MAC Address The MAC address of the Switch connected to the corresponding port, if any. Auth PAE State The Authenticator PAE State will display one of the following: Initialize, Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuth, ForceUnauth, and N/A. Backend State The Backend Authentication State will display one of the following: Request, Response, Success, Fail, Timeout, Idle, Initialize, and N/A. Port Status The status of the controlled port can be Authorized, Unauthorized, or N/A. 142