D-Link DGS-3630-52TC Product Manual - Page 23

CAUTION, SFP Ports, Ports, Appendix A - Technical Specifications, Power, Console, Fan Err, Link/Act

Get D-Link DGS-3630-52TC PDF manuals and user guides View all D-Link DGS-3630-52TC manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide CAUTION: This equipment is to be connected only to PoE networks without routing to the outside plant. For a complete list of SFP/SFP+ transceivers that are compatible with this switch, refer to the SFP Ports and SFP+ Ports sections in Appendix A - Technical Specifications. LED Indicators Located on the front panel of this switch are LED indicators: Power, Console, RPS, Fan Err, Link/Act and PoE indicators for all the ports, Link/Act and PoE indicators for mode selection, and Stack ID. LED Power Console RPS Fan Err Link/Act LEDs PoE Figure 2-18 LED indicators for the DGS-3630-52PC Description This LED will light solid green after the Switch has been powered on successfully. This LED will be off when the Switch is no longer receiving power (i.e. powered off). This LED will light solid green when the RJ45 console port is active. The LED will light solid amber when the mini-USB console port is active. This LED will be off when both console ports are not active. This LED will light green when the Redundant Powers Supply is in use. This LED will be off when the RPS is not in use. This LED will light solid red when the fan fails. This LED will be off when the fan is operating normally. The Switch has LED indicators for Link and Activity. RJ45 Ports: This LED will light solid green when there is a connection (or link) to a 1000 Mbps Ethernet device or solid amber when there is a connection (or link) to a 10/100 Mbps Ethernet device on any of the RJ45 ports. The LED will blink green when a 1000 Mbps port is active or blink amber when a 10/100 Mbps port is active. The LED will be off when there is no link or activity. SFP Ports: This LED will light solid green when there is a connection (or link) to a 1000 Mbps Ethernet device or solid amber when there is a connection (or link) to a 100 Mbps Ethernet device on any of the SFP ports. The LED will blink green when a 1000 Mbps port is active or blink amber when a 100 Mbps port is active. The LED will be off when there is no link or activity. SFP+ Ports: This LED will light solid green when there is a connection (or link) to a 10 Gbps Ethernet device or solid amber when there is a connection (or link) to a 1 Gbps Ethernet device at any at any of the SFP+ ports. The LED will blink green when a 10 Gbps port is active or blink amber when a 1 Gbps port is active. The LED will be off when there is no link or activity. This LED will light solid green when the corresponding ports are feeding power to the PoE devices plugged in. This LED will light solid amber when the port is in an error condition state. This LED will be off when the ports are not supplying power to the devices plugged into the ports. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
DGS-3630 Series Layer 3 Stackable Managed Switch Hardware Installation Guide
23
CAUTION:
This equipment is to be connected only to PoE networks without routing to the outside
plant.
For a complete list of SFP/SFP+ transceivers that are compatible with this switch, refer to the
SFP Ports
and
SFP+
Ports
sections in
Appendix A - Technical Specifications
.
LED Indicators
Located on the front panel of this switch are LED indicators: Power, Console, RPS, Fan Err, Link/Act and PoE
indicators for all the ports, Link/Act and PoE indicators for mode selection, and Stack ID.
Figure 2-18 LED indicators for the DGS-3630-52PC
LED
Description
Power
This LED will light solid green after the Switch has been powered on
successfully.
This LED will be off when the Switch is no longer receiving power (i.e. powered
off).
Console
This LED will light solid green when the RJ45 console port is active.
The LED will light solid amber when the mini-USB console port is active.
This LED will be off when both console ports are not active.
RPS
This LED will light green when the Redundant Powers Supply is in use.
This LED will be off when the RPS is not in use.
Fan Err
This LED will light solid red when the fan fails.
This LED will be off when the fan is operating normally.
Link/Act LEDs
The Switch has LED indicators for Link and Activity.
RJ45 Ports:
This LED will light solid green when there is a connection (or link)
to a 1000 Mbps Ethernet device or solid amber when there is a connection (or
link) to a 10/100 Mbps Ethernet device on any of the RJ45 ports. The LED will
blink green when a 1000 Mbps port is active or blink amber when a 10/100
Mbps port is active. The LED will be off when there is no link or activity.
SFP Ports:
This LED will light solid green when there is a connection (or link)
to a 1000 Mbps Ethernet device or solid amber when there is a connection (or
link) to a 100 Mbps Ethernet device on any of the SFP ports. The LED will blink
green when a 1000 Mbps port is active or blink amber when a 100 Mbps port is
active. The LED will be off when there is no link or activity.
SFP+ Ports:
This LED will light solid green when there is a connection (or link)
to a 10 Gbps Ethernet device or solid amber when there is a connection (or
link) to a 1 Gbps Ethernet device at any at any of the SFP+ ports. The LED will
blink green when a 10 Gbps port is active or blink amber when a 1 Gbps port is
active. The LED will be off when there is no link or activity.
PoE
This LED will light solid green when the corresponding ports are feeding power
to the PoE devices plugged in.
This LED will light solid amber when the port is in an error condition state.
This LED will be off when the ports are not supplying power to the devices
plugged into the ports.