D-Link DGS-3630-52TC WEB Reference Guide - Page 55
server RADIUS
![]() |
View all D-Link DGS-3630-52TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
DGS-3630 Layer 3 Stackable Managed Switch CLI Reference Guide radius-server host IP-ADDRESS [auth-port PORT] [acct-port PORT] [timeout SECONDS] [retransmit COUNT] key [0 | 7] KEY-STRING no radius-server host IP-ADDRESS Parameters IP-ADDRESS auth-port PORT-NUMBER acct-port PORT-NUMBER timeout SECONDS retransmit COUNT 0 7 key KEY-STRING Specifies the IP address of the RADIUS server. (Optional) Specifies the UDP destination port number for sending authentication packets. The range is 0 to 65535. Set the port number to zero if the server host is not for authentication purposes. The default value is 1812. (Optional) Specifies the UDP destination port number for sending accounting packets. The range is 0 to 65535. Set the port number to zero if the server host is not for accounting purposes. The default value is 1813. Specifies the server time-out value. The range of timeout is between 1 and 255 seconds. If not specified, the default value is 5 seconds. (Optional) Specifies the retransmit times of requests to the server when no response is received. The value is from 0 to 20. Use 0 to disable the retransmission. If not specified, the default value is 2 (Optional) Specifies the password in clear text form. This is the default option. (Optional) Specifies the password in the encrypted form. Specifies the key used to communicate with the server. The key can between 1 and 254 clear text characters. Default By default, no server is configured. Command Mode Global Configuration Mode. Command Default Level Level: 15. Usage Guideline Use this command to create RADIUS server hosts before it can be associated with the RADIUS server group using the server command. Example This example shows how to create two RADIUS server hosts with the different IP address. Switch#configure terminal Switch(config)# radius-server host 172.19.10.100 auth-port 1500 acct-port 1501 timeout 8 retransmit 3 key ABCDE Switch(config)# radius-server host 172.19.10.101 auth-port 1600 acct-port 1601 timeout 3 retransmit 1 key ABCDE Switch(config)# 4-16 server (RADIUS) This command is used to associate a RADIUS server host with a RADIUS server group. Use the no form of this command to remove a server host from the server group. 53
![](/manual_guide/products/dlink-dgs363028sc-web-reference-guide-ee5be37/55.png)