D-Link DIR-451 User Manual - Page 10
Installation - mobile router
UPC - 790069295966
View all D-Link DIR-451 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Section 2 - Installation Installation This section will walk you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in the attic or garage. Connect to your Network Note: Ensure that the power to your DIR-451 Mobile Router is not connected before performing the installation steps below. 32-bit PCMCIA (UMTS) Card Connection Note: To preserve the life of your phone's battery, it is recommended that you use your phone's charging cradle when connected to the DIR-451 Mobile Router. 1. Attach the antenna. a. Remove the antenna from its plastic wrapper. b. Screw the antenna in a clockwise direction to the back panel of the unit. c. Once secured, position the antenna upward at its connecting joint. This will ensure optimal reception. 2. Insert your wireless 32-bit PCMCIA (UMTS) card into the internet 32-bit PCMCIA Card Slot. 3. Insert the Ethernet cable into LAN Port 1 on the back panel of the DIR-451 Mobile Router, and an available Ethernet port on the network adapter in the computer you will use to configure the unit. Note: The DIR-451 Mobile Router LAN Ports are "Auto-MDI/MDIX." This provides either patch or crossover Ethernet cable LAN Port access. D-Link DIR-451 User Manual 10