D-Link DIR-505L Quick Installation Guide - Page 1

Start Here - Select The Mode

Quick Install Guide

Package Contents

If any of the above items are missing, please contact your reseller.

DIR-505L

LEDs

SharePort Mobile Companion

Power LED

- A solid green light indicates

a proper connection to the power supply.

The light will be solid red during boot up

and during a factory reset.

Start Here

• SharePort Mobile Companion

• Ethernet Cable

QRS Mobile App for iOS Device

Scan this QR code using your iOS mobile

device. You will be directed to the App store

to download the QRS Mobile App so that

you may begin the Installation process.

SharePort Mobile App for iOS Device

Scan this QR code using your iOS

mobile device to download the App

and begin file sharing.

Requirements:

Compatible with

iPhone, iPod touch and iPad. Requires

iOS 4.3 or later.

Router Mode

Repeater Mode

Wi-Fi Hotspot Mode

This feature behaves as a router in areas where you

cannot take your home router so that you may

wirelessly connect to the internet.

This feature extends your wireless coverage allowing you

to share your wireless signal with all your portable devices

such as your mobile device or laptop.

This feature allows you to have your own private network

from anywhere that you may travel.

Pleaser refer to the user manual for further

information regarding SharePort Mobile

App. Please download the user manual from

http://www.dlink.com/support/

2

3

4

5

QRS Mobile Setup For Router Mode (iPhone and iPad Only)

1

Scan the QRS Mobile code

to download QRS Mobile

App from the App Store to

your iPhone or iPad. You can

also search

“QRS Mobile”

from the App Store.

Move the switch on the DIR-

505L to “

Router/AP Mode

”

and plug it into a wall outlet.

From your iOS mobile device,

click

Settings

. Then, click

Wi-Fi.

Once it connected, click on the

QRS

Mobile

icon from your iOS mobile

device. Then click

Start

to continue.

Please follow the on-screen

instructions to complete the setup.

2

3

4

5

Router/Access Point Mode

1

Find an outlet close to an Internet- enabled device.

Then, move the switch to “

Router/AP Mode”

and plug

the DIR-505L into a wall outlet. Verify that the power

LED has turned green.

Connect one end of the Ethernet cable into the

Ethernet port of the Internet-enabled device (e.g.

modem, router) and then plug the other end of this

cable into the Ethernet port of the DIR-505L.

From your laptop or mobile device go to your

Wireless Utility to display the available wireless

networks and select the Wi-Fi name that is shown

on your companion card (ex:

dlink-a8fa).

Then,

enter the Wi-Fi password included in your card

(

ex:

akbdj19368).

Outlet

Ethernet

Power off

Charger

Repeater

Wi-Fi

Hotspot

Router/AP

Router/AP

Web browser link:

http://dlinkrouter

or

http:// 192.168.0.1

Default configuration

Username:

“Admin”

Password:

““ (leave the field blank)

Wi- Fi Name (SSID) :

dlinka8fa

Wi-Fi Password :

akbdj19368

Web browser link:

http://dlinkrouter

or

http:// 192.168.0.1

Your configuration

Username:

Admin

Password:


Wi-Fi Password :

D-Link DIR-505 Mobile Companion Wi-Fi Configuration Note

Open a web browser. First time users will

automatically be directed to the setup wizard. Please

follow the on-screen instructions to complete the setup.

If this is your second time type

http://dlinkrouter

(Windows)

or http://dlinkrouter.local

(Mac/iPhone/

iPad)

in the address bar. Once the setup is complete

then proceed to the next step.

From your laptop or mobile device go to

your wireless utility to display the available

wireless networks and select the network

that you created for Internet access.

Internet

Repeater Mode

Move the switch to

“Repeater

Mode”.

Then, plug the DIR-505L

into a wall outlet and verify that

the power LED has turned green.

From your laptop or mobile device go

to your Wireless Utility to display the

available wireless networks and select

the network that is displayed on your

companion card (ex:

dlink-a8fa).

Then,

enter the Wi-Fi password included in your

card

(ex: akbdj19368).

Select the configuration method and click

Next

.

For Manual configuration, select the Wi-Fi

network you would like the DIR-505L to

connect to wirelessly.

Web browser link:

http://dlinkrouter

or

http:// 192.168.0.1


Username:

“Admin”

Password:



dlinka8fa

Wi-Fi Password :

akbdj19368

Web browser link:

http://dlinkrouter

or

http:// 192.168.0.1

Your configuration

Username:

Admin

Password:


Wi-Fi Password :


Enter the Wi-Fi Password and click

Next

.

Once the second screen appears, you have

successfully completed the setup. Please

click

Save

and write down the Wi-Fi Name

(SSID) and Password on your companion card

for future reference.

Power off

Charger

Repeater

Wi-Fi

Hotspot

Router/AP

Repeater

2

3

4

5

6

1

From your laptop or mobile device

go to your wireless utility to display

the available wireless networks and

select the network that you previously

connected to in Step 5 for internet access.

Repeater Mode

Open a web browser and type

http://dlinkrouter

(Windows) or

http://dlinkrouter.local

(Mac/

iPhone/iPad) . Please follow the

on-screen instructions to complete

the setup.

AP Mode

Note:

The SharePort Mobile App only

works on Router and Wi-Fi Hotspot

Mode.

Settings

6

Once the screen appears, you

have successfully completed the

setup. Please click

Save

and write

down the Wi-Fi Name (SSID) and

password on your companion

card for future reference.

7

From your iOS mobile device go

to your wireless utility to display

the available wireless networks

and select the network that you

created for internet access.

Web browser link:

http://dlinkrouter

or

http:// 192.168.0.1


Username:

“Admin”

Password:



dlinka8fa

Wi-Fi Password :

akbdj19368

Web browser link:

http://dlinkrouter

or

http:// 192.168.0.1

Your configuration

Username:

Admin

Password:


Wi-Fi Password :


Use Access Point (AP) mode if you want to connect

wireless clients (such as laptops, tablets, smartphones, and

media players) to your wired network (via router, switch, or

PowerLine devices).

Wireless Utility to displays the available

wireless networks and select the Wi-Fi

name that is shown on your companion

card (ex:

dlink-a8fa).

Then, enter the

Wi-Fi password included in your card

(

ex:

akbdj19368).

Power off

Charger

Repeater

Wi-Fi

Hotspot

Router/AP

Router/AP

Operation Mode

Charger Mode is only used to charge your mobile

device such as an iPad, iPhone & Android etc. While

the DIR-505L is on charge mode, all other functions

will be disabled.

D-Link DIR-505L Quick Installation Guide - Page 1

D-Link DIR-505L Manual

Page 1 highlights