D-Link DIR-890L/R User Manual - Page 40
Point-to-Point-Tunneling Protocol if your Internet Service Provider ISP uses a PPTP connection. Your
View all D-Link DIR-890L/R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Section 3 - Configuration PPTP Choose PPTP (Point-to-Point-Tunneling Protocol) if your Internet Service Provider (ISP) uses a PPTP connection. Your Internet service provider (ISP) can provide you with a username and password. PPTP Server IP Enter the PPTP Server IP Address provided by your ISP. Address: Username: Enter the Username provided by your ISP. Password: Enter the Password provided by your ISP. Reconnect Mode: Select either Always on, On demand, or Manual. Maximum Idle Time: Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable Autoreconnect. Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. PPTP IP Address: Enter the PPTP IP Address provided by your ISP (for Static IP only). PPTP Subnet Mask: Enter the PPTP Subnet Mask provided by your ISP (for Static IP only). PPTP Gateway IP Enter the PPTP Gateway IP Address provided by your ISP (for Static Address: IP only). Primary DNS Server: Enter the Primary DNS Server IP address assigned by your ISP. Secondary DNS Enter the Secondary DNS Server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - by default this field will be set to Auto. Select Manual if you need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-890L User Manual 35