D-Link DP-301P Product Manual - Page 15
Network continued, Address Resolution Protocol is a TCP/IP - + default ip address
View all D-Link DP-301P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Using the Web Configuration (continued) Network (continued) TCP/IP Protocol IP Address: The default IP address is 192.168.0.10 Subnet Mask: The default subnet mask is 255.255.255.0 Default Gateway: Enter the IP address of the default gateway (router). IP Assignment: Manually Assign: Select this option when you manually input the IP address in the field above. Assign Automatically Using: RARP: Reverse Address Resolution Protocol is a TCP/IP protocol that assigns an IP address using MAC address information. BOOTP: Bootstrap Protocol can provide an IP address to the print server. DHCP: Dynamic Host Configuration Protocol automatically assigns an IP address to the print server. SNMP Community 1-3: Simple Network Management Protocol is a set of protocols for managing complex networks. Name: Enter a name. Access Right: Select from the pull-down menu. Read Only or Read/Write. Net BEUI Protocol Net Bios Extended User Interface is an enhanced version of the NetBios protocol that is used by many LAN managing systems. Workgroup: Enter a name for the Workgroup. Maximum Limitation: Enter the maximum number of connected stations. AppleTalk Protocol AppleTalk Zone: Enter an asterisk. Chooser Name: Enter the printer name. Printer Type: Enter the printer type. PostScript Level: Enter the PostScript level. Font Group: Enter the font group. Save: Click Save to save the changes. 15