D-Link DSB-R100 Product Manual - Page 35
DSB-R100., I am running the DSB-R100 software, but I can't, hear anything. What should I do? - windows 7 drivers
View all D-Link DSB-R100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
DSB-R100. (A) I am running the DSB-R100 software, but I can't hear anything. What should I do? ANS: z If your software is already running and you can operate the control panel switches, this shows that the radio has been installed correctly. If this is not the case, then the radio receiver/recorder is not operating properly and you should make sure that the DSB-R100 Adapter has been installed properly. z If you still can't hear anything even though the DSB-R100 is operating normally, one of the following situations may be occurring: A. The RCA jack may not be correctly inserted in the sound card's Line In socket. Please make sure it is inserted correctly. B. The sound card's "Line In" volume may be set on mute or at the lowest value. Adjust the volume dial and the mute switch on the right side of the control panel until you are able to hear sound. (If adjusting the volume dial has no effect, you can try opening the Windows 95 Mixer and making adjustments from there.) C. A problem with the sound card driver may be making it impossible for the DSB-R100's signal to enter the computer. Please re-install the driver software that came with your sound card. D. If the volume indicator on the control panel is blinking but no sound is heard, please see the answer to question B. 34