D-Link DSL-24MF Specifications - Page 2

DSL-24MF Technical Specifications ADSL Microfilter Compliance - ETS300 001 Attachments to the PSTN; General technical requirements for equipment connected to analogue subscriber interface in the PSTN - ANSI T1.413 Network and Customer Installation Interfaces Asymmetric Digital Subscriber Line (ADSL) Metallic Interface - ITU-T G.992.1 Asymmetrical Digital Subscriber Line (ADSL) Transceiver - T1E1.4/2001-007R3 In-Line Filter Standard - ITU-TK.21 Resistibility of Telecommunication Equipment Installed in Customer Premises to Overvoltages and Overcurrents - ITU-T K.44 Resistibility of Telecommunication Equipment to Over Voltage and Over Currents, Basic Recommendation Specifications Parameter Condition Min. Typ. Max Unit ADSL band 40KHz~1104 45 dB characteristic KHz Longitudinal 200Hz ~1KHz 58 dB Balance 1KHz~3KHz 53 Insertion loss @1004Hz dB -0.3 dB Cut off fr e.q @10KHz dB Attenuation 200 to 3.4kHz 0.5 dB 3.4kHz~ 4kHz 0.75 dB Return loss SRL-L 30 dB Group delay @0.2-4.0KHz 100 ms ms CMRR @0.6-3.2KHz -100 dB DC resistance 10 MW Environmental & Physical Operational Temperature -5 to 60 degrees C Storage Temperature -15 to 80 degrees C Operational Humidity 10% to 90% RH ESD Discharge Limits Non Damaging 15 KVdc Ordering Information DSL-24MF In-line ADSL Microfilter Schematic 1 2 LINE 3 4 5 6 1 2 3 PHONE 4 5 6 Canada TEL: 1-905-8295033 FAX: 1-905-8295095 RECYCLABLE Rev. 01 (Mar. 2003) Printed in Taiwan Specifications subject to change without prior notice. D-Link is a registered trademark of D-Link Corporation/D-Link System Inc. All other trademarks belong to their proprietors.