D-Link DSL-322T User Guide - Page 39

Disable the DHCP Server

Get D-Link DSL-322T PDF manuals and user guides View all D-Link DSL-322T manuals
Add to My Manuals
Save this manual to your list of manuals

Page 39 highlights

DSL-322T ADSL Modem User Guide The Ending IP Address is the highest IP address number in the pool. Type in the Lease Time in the entry field provided. This is the amount of time in seconds that a workstation is allowed to reserve an IP address in the pool if the workstation is disconnected from the network or powered off. Disable the DHCP Server To disable DHCP, click to select the No DHCP option and click on the Apply button. Choosing this option requires that workstations on the local network must be configured manually or use another DHCP server to obtain IP settings. DHCP Settings window with DHCP disabled If you configure IP settings manually, make sure to use IP addresses in the subnet of the Modem. You will need to use the Modem's IP address as the Default Gateway for the workstation in order to provide Internet access. Note To manually configure IP settings on Windows workstations, open the TCP/IP Properties menu and select the "Use the following IP address" option. You will need to supply the IP address, subnet mask and default gateway (use the IP address of the DSL-322T) for each workstation. The example here also uses manually configured DNS settings. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
DSL-322T ADSL Modem User Guide
30
The
Ending IP Address
is the highest IP address number in the pool. Type in the
Lease Time
in the entry field
provided. This is the amount of time in seconds that a workstation is allowed to reserve an IP address in the pool if the
workstation is disconnected from the network or powered off.
Disable the DHCP Server
To disable DHCP, click to select the
No DHCP
option and click on the
Apply
button. Choosing this option requires
that workstations on the local network must be configured manually or use another DHCP server to obtain IP settings.
DHCP Settings window with DHCP disabled
If you configure IP settings manually, make sure to use IP addresses in the subnet of the Modem. You will need to use
the Modem’s IP address as the Default Gateway for the workstation in order to provide Internet access.
Note
To manually configure IP settings on Windows workstations, open the TCP/IP Properties
menu and select the “Use the following IP address” option. You will need to supply the IP
address, subnet mask and default gateway (use the IP address of the DSL-322T) for
each workstation. The example here also uses manually configured DNS settings.