D-Link DSM-622H Product Manual - Page 14
Home > Wireless continued, The Wireless IP Address settings of the DSM-622H/DSM-624H
UPC - 790069263521
View all D-Link DSM-622H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Using the Configuration Utility (continued) Home > Wireless (continued) Set as Default Interface: Select Yes for wireless. Select No for wired. Wireless Mode: Client: Select this mode to use the DSM-622H/624H in client mode Access Point: Select this mode to use in access point mode. SSID: Enter the SSID in access point mode. You may click Site Survey to select an available wireless AP or router. Mode: Select 802.11g or 802.11b mode Channel: Select the channel here. WEP: Select Enabled or Disabled. WEP Encryption: Select the encryption level here. Key Type: Select HEX or ASCII. Keys 1-4: You can input up to 4 encryption keys. Click to select the key you wish to use. The Wireless IP Address settings of the DSM-622H/DSM-624H Dynamic IP: Select to obtain an IP address from a DHCP server Static IP: Select to manually assign an IP address. When you select this option you will fill out the fields below. Static IP Address: Enter the IP address in this field Subnet Mask: Enter the subnet mask Gateway Address: Enter the gateway address Apply: Click Apply to save the changes. 14