D-Link DSN-1100-10 Datasheet - Page 3

DSN-1100-10 iSCSI SAN Array Technical Specifications Features Drive Bays • 5 Drive Interface Support • SATA-II System Memory • 256MB standard Cache Memory • 256MB standard Battery Backup for Cache • Standard (approximately 72 hours on full charge) Bandwidth • Up to 425MB/s Storage Capacity • 10TB Capacity with 2TB Hard Drives Operating Systems Supported Please see support.dlink.com for latest support information • Windows Vista® 32-bit & x64 (Ultimate & Enterprise) with Built-in iSCSI initiator • Windows Server® 2003 R2 | SP1 32 & 64-bit (Standard & Enterprise) with v2.07 iSCSI initiator or later • Windows Server 2008 Enterprise 32 & 64-bit with Built-in iSCSI initiator • Windows XP Pro® 32 & 64-bit with v2.07 iSCSI initiator or later • Windows 2000 Advanced Server - No MS iSCSI Initiator support, Qlogic HBA only • Red Hat® 7.3 • Red Hat Enterprise AS update 5 (64-bit) • Red Hat Enterprise 5 update 2 (64-bit) • SuSE® Professional 9.3 32-bit • SuSE Enterprise Server 10.2 32-bit • Sun Solaris® 10 build 6/06 • IBM AIX 5L • Microsoft Hyper-V • VMWare ESX Server® 3.02 & 3.5 • VMWare ESX Server 4.0 • Virtual Iron v4.2 • Citrix XenServer® v4 • Mac OS X® (10.4 & 10.5) Supported NICs, iSCSI Accelerators and iSCSI HBAs Please see support.dlink.com for latest support information • Intel® Pro 1000MT & XT [1GbE] • Intel Pro 10000 CX4 [10GbE] • Myricom 10G-PCIE-8A-C+E [10GbE] • Chelsio® S310X-SR-XFP [10GbE] • Neterion® Xframe® II & Xframe E [10GbE] • Alacritech® SES2104ET (drivers: SNP 9.1.0.1092 & 7.3.1.0) • Alacritech SES2102ET (drivers: SNP 9.1.0.1092 & 7.3.1.0) • QLogic® 4010C, 4052C, & 4062C iSCSI Network Interface iSCSI Network Interface • Four 1GbE Copper Ports Host Interface • iSCSI Draft 20 compliant initiator Connections • 1,024 hosts CHAP Authentication • Yes Access Control of Management • Yes iSCSI/TCP/IP Full HW Offload • Yes Jumbo Frames Support • Yes Link Aggregation Group Support • Yes - Up to four LAGs (Static LAG) VLAN Support Flow Control • Up to four 1-to-1 mapping between IP subnet and VLAN. Multiple VLANs per physical port with VLAN tag. All physical ports in LAG belong to same VLAN (IEEE802.1Q Tag) • Enabled by default business