D-Link DSN-540 Datasheet - Page 4

DSN-5000 Series iSCSI SAN Array Access Control of Management iSCSI/TCP/IP Full HW Offload Jumbo Frames Support LAG Support (Link Aggregation) VLAN Support Flow Control Volume & RAID Support RAID Controller RAID Support Volumes Target Nodes Online Capacity Expansion Hot Swappable Drives Instant Volume Access Free Space Defragmentation Auto-Detection Failed Drive Auto-Rebuild Spare Drive RAID Level Migration Drive Roaming in Power Off (configured drives are not bay-specific) Micro Rebuilds Storage Management Embedded IP-Based Management GUI Firmware Field Upgradeable SMI-S Version 1.1 Event Log Power Supply Type Input Voltage Input Frequency Input Current Power Factor Correction Environmental Operating Temperature Storage Temperature Operating Humidity Storage Humidity • Yes • Yes • Yes • DSN-5110-10: Up to Four LAGs (Static LAG) • DSN-5210-10: Up to Eight LAGs (Static LAG) • DSN-5410-10: Not Applicable • DSN-5110-10 and DSN-5210-10: Up to Eight 1-to-1 Mapping between IP Subnet and VLAN. Multiple VLANs per physical port with VLAN Tag. • All physical ports in LAG belong to same VLAN (IEEE 802.1Q Tag) • Enabled by default • Intergrated in ASIC Chip (one per controller) • RAID Levels 0, 1, 1+0 and 5 (Striped sets, mirrored sets, striped mirrored sets and parity sets) • 1,024 Virtual Volumes (256 accessible per initiator) • 1,024 • Yes • Yes • Yes • Yes • Yes • Yes • Yes • Yes • Yes • Create, manage, expand and monitor storage pool, volumes and RAID • Event manager to view and persist events • Yes • Yes • Yes • Dual Redundant Hot Swappable 2U 430 Watt • 85-264 VAC (auto-switching) • 50-63 Hz • 2A Maximum at 115VAC • Per EN61000-3-2 • 41° to 104°F (5° to 40°C) • -4° to 158°F (-20° to 70°C) • 10% ~ 80% (Non-condensing) • 5% ~ 95% (Non-condensing) business