D-Link DSN-6020 User Manual for DSN-6110 & DSN-6110 with DSN-610 - Page 55
Parity check
View all D-Link DSN-6020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
RAID Current owner Preferred owner "Failed" the RAID group fails. "Degraded" the RAID group is not healthy and not completed. The reason could be lack of disk(s) or have failed disk The RAID level of the RAID group. The owner of the RAID group. The default owner is controller 1. The preferred owner of the RAID group. The default owner is controller 1. • RG operation description: Create Create a RAID group. Migrate Activate Deactivate Parity check Delete Change the RAID level of a RAID group. Please refer to next chapter for details. Activate the RAID group after disk roaming; it can be executed when RG status is offline. This is for online disk roaming purpose. Deactivate the RAID group before disk roaming; it can be executed when RG status is online. This is for online disk roaming purpose. Regenerate parity for the RAID group. It supports RAID 3 / 5 / 6 / 30 / 50 / 60. Delete the RAID group. Set preferred owner Set the RG ownership to the other controller. Set disk property Change the disk property of write cache and standby options. Write cache: "Enabled" Enable disk write cache. (Default) "Disabled" Disable disk write cache. Standby: "Disabled" Disable auto spindown. (Default) "30 sec / 1 min / 5 min / 30 min" Enable hard drive auto spindown to save power when no access after certain period of time. Read ahead: "Enabled" Enable disk read ahead. (Default) "Disabled" Disable disk read ahead. 55