D-Link DSP-W320 Quick Install Guide - Page 2

Precautions, Device Information, Mounting, Minimum Requirements, Support - d link

Get D-Link DSP-W320 PDF manuals and user guides View all D-Link DSP-W320 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

Mounting i Device Information ! Precautions 1 / Place at the desired location at least 2 feet from the ground. Use a pencil to mark the hole behind the mounting tab. Right Outlet Power Button / Power Status LED Electric shock can cause serious injury or death. Install only in a dry environment. Left Outlet Power Button 2 / Use a 15/64" drill bit to drill a 1-inch deep hole over the / Power Status LED Do not place near any source of water or potential flooding zones. pencil mark. Insert the plastic anchor to support the screw. Reset Button / System Status LED • Plug into a grounded electrical outlet. Do not plug into an extension cord or power strip. 3 / Twist the screw into the anchor. Leave 1/4" of the screw • If plugged into an outlet controlled by a wall switch, assure that the switch is left in the on exposed from the wall. System Status LED Power Status LED position and is never turned off. Booting up / Resetting Switched on • Ensure that the plugs in the housing are facing downwards. 4 / Align the screw with the hole on the mount. Slide the mount down to lock into place, Connected to Wi-Fi Switched off Ready for setup / Disconnected • Do not exceed the electrical ratings. • Keep away from children and pets. allowing it to hang. Do not over tighten the screw. Firmware being upgraded • Do not open the unit to modify or repair it. • Unplug from wall Outlet before cleaning. Minimum Requirements To install this product, you will need: • A 802.11n/g router • An Internet connection • An e-mail account (required to register for mydlink service) • The mydlink™ app is available for iPhone®, iPad® and Android™ devices. Please refer to the mobile app's store page to check whether your device is compatible. • An available power outlet • Wall space under the outlet to mount the device ? FAQ What do I do if my smart plug is not working properly? Reset the smart plug and reinstall the smart plug. To reset your smart plug, press and hold the Reset button until the LED turns solid red. During installation, ensure that: • you have an Internet connection on your router • your router's Wi-Fi is on • your mobile device is connected to the Internet How can I use voice commands to control my smart plug? The smart plug will work with both Amazon Alexa and the Google Assistant. For setup instructions on these services, visit the following websites: Alexa: https://www.dlink.com/en/alexa The Google Assistant: https://www.dlink.com/en/google-assistant Support For troubleshooting tips and more information, visit: Canada - http://support.dlink.ca USA - support.dlink.com ©2019 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries. Product specification, size and shape are subject to change without notice, and actual product appearance may differ from that depicted on the package. Visit dlink.ca for more details. Version 1.01 (CA)_70X110 || July 4, 2019

  • 1
  • 2
What do I do if my smart plug is not working
properly?
Reset the smart plug and reinstall the smart plug.
To reset your smart plug, press and hold the
Reset
button until the LED turns solid red.
During installation, ensure that:
• you have an Internet connection on your router
• your router’s Wi-Fi is on
• your mobile device is connected to the Internet
How can I use voice commands to control my
smart plug?
The smart plug will work with both Amazon Alexa and
the Google Assistant. For setup instructions on these
services, visit the following websites:
Alexa:
The Google Assistant:
FAQ
Precautions
•
Plug into a grounded electrical outlet. Do not
plug into an extension cord or power strip.
•
If plugged into an outlet controlled by a wall
switch, assure that the switch is left in the on
position and is never turned off.
•
Ensure that the plugs in the housing are facing
downwards.
•
Do not exceed the electrical ratings.
•
Keep away from children and pets.
•
Do not open the unit to modify or repair it.
•
Unplug from wall Outlet before cleaning.
Electric shock can cause serious injury or
death. Install only in a dry environment.
Do not place near any source of water or
potential flooding zones.
!
?
Device Information
i
Booting up / Resetting
Connected to Wi-Fi
Ready for setup / Disconnected
Firmware being upgraded
Reset Button
/ System Status LED
Left Outlet
Power Button
/ Power Status LED
Right Outlet
Power Button
/ Power Status LED
System Status LED
Power Status LED
Switched on
Switched off
Place at the desired location at
least 2 feet from the ground.
Use a pencil to mark the hole
behind the mounting tab.
Use a 15/64" drill bit to drill
a 1-inch deep hole over the
pencil mark. Insert the plastic
anchor to support the screw.
Twist the screw into the
anchor. Leave 1/4" of the screw
exposed from the wall.
Align the screw with the hole
on the mount. Slide the mount
down to lock into place,
allowing it to hang.
Do not over tighten the screw.
Mounting
1
/
2
/
3
/
4
/
To install this product, you will need:
• A 802.11n/g router
• An Internet connection
• An e-mail account (required to register for
mydlink service)
• The mydlink™ app is available for iPhone®, iPad®
and Android™ devices. Please refer to the mobile
app's store page to check whether your device is
compatible.
• An available power outlet
• Wall space under the outlet to mount the device
Minimum Requirements
©2019 All rights reserved. D-Link and the D-Link logo
are registered trademarks of D-Link Corporation or its
subsidiaries. Product specification, size and shape are
subject to change without notice, and actual product
appearance may differ from that depicted on the
package. Visit dlink.ca for more details.
Support
For troubleshooting tips and more
information, visit:
Canada
USA
- support.dlink.com
Version 1.01 (CA)_70X110 ||
July 4, 2019