D-Link DWL-7000AP Product Manual - Page 18
Advanced > Grouping
View all D-Link DWL-7000AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Using the Configuration Menu (continued) Advanced > Grouping Link Integrity Load Balance: Select Enabled or Disabled. When you Enable Load Balance you allow several DWL-7000APs to balance wireless network traffic and wireless clients among the DWL-7000APs with the same group name. After selecting this option, you will be prompted to enter a Group Name. All the APs that share Load Balancing must have the same Group Name and the same SSID. Assign each Access Point a different non-overlapping channel (e.g., 1, 6, 11). User Limit: Set the User Limit in this field (0-64) Link Integrity: Select Enabled or Disabled When Link Integrity is Enabled, whenever the Ethernet connection between the LAN and the AP is disconnected - then the Wireless segment associated with the AP will also be disconnected from the AP. Ethernet Link Status: This field displays the Ethernet Link Status. Link Up indicates that there is an Ethernet LAN connection to the AP. 18