D-Link DWL-8610AP Datasheet - Page 2

DWL-8610AP Unified Wireless Concurrent Dual Band 802.11ac Access Point Self-Configuring Cluster For small businesses that need to deploy multiple APs but lack the resources to tackle the complicated task of network management, the DWL8610AP's self-configuring cluster feature offers the ideal solution. When a small number of DWL-8610APs are deployed on the network, they may be configured to form a self-configuring cluster. Once the administrator configures one access point, the same configuration can then be applied to all remaining APs. Up to 16 APs may be used to form a cluster, making setting up your business wireless network a simple and easy. Centrally Manage your Wireless Network When working in conjunction with a D-Link Unified Switch or Wireless Controller, the DWL-8610AP, like other D-Link Unified Access Points, may be centrally managed. This allows up to 256 D-Link Unified Access Points to be deployed and managed easily and efficiently. Once the APs are discovered by the switch/controller, the administrator can push a specific set of configurations onto them, rather than having to do so one by one. In addition, RF resource management and security are also managed centrally, thus allowing the administrator to preemptively identify potential deficiencies and weaknesses in the network. Automatic RF Management Saves Power and Money When a number of access points are deployed close to each other, interference may result if proper RF management isn't implemented. When a DWL-8610AP senses a neighbor nearby, it can automatically select a non-interfering channel. This greatly reduces RF interference and will allow the administrator to deploy APs more densely. To further minimize interference, when a nearby AP is operating on the same channel, the DWL-8610AP will automatically lower its transmission power2. At any time should the nearby AP drop from the network, the DWL-8610AP will increase its transmission power to expand coverage. Quality of Service for Increased Connectivity The DWL-8610AP supports 802.1p Quality of Service (QoS) for enhanced throughput and better performance of time-sensitive traffic like VoIP and streaming DSCP. The DWL-8610AP is WMM-certified, so in the event of network congestion, time-sensitive traffic can be given priority ahead of other traffic. Furthermore, when a number of DWL-8610APs are in close proximity with each other, an access point will refuse new association requests once its resources are fully utilized. Instead, the association request will be picked up by a neighboring unit. This feature ensures that no single AP is overburdened while others nearby sit idle. Security The DWL-8610AP supports the latest standards in Wi-Fi security, including WEP, WPA, WPA2, and 802.1X. In addition, it supports up to 16 Virtual Access Points (VAP) per radio, for a total of 32 VAPs, which allows the administrator to assign different access privileges to different groups of users. When Station Isolation is enabled, the AP blocks communication between wireless clients on the same radio and VAP. Rogue APs in the network can be easily detected, and the administrator will be immediately notified of any security threat. When used together with D-Link's Wireless Controller or Unified Switch, the security can be enhanced further. Easy and Convenient Installation With internal antennas and a simple housing, the DWL-8610AP can be installed on a wall or ceiling and blends in with most office environments. Enclosed in a plenum-rated chassis, the DWL-8610AP adheres to strict fire regulations for placement in air passageways. For easy installation, it has integrated 802.3at Power over Ethernet (PoE) support, allowing installation of this device in areas where power outlets are not readily available. Limited Lifetime Warranty D-Link offers a Limited Lifetime Warranty on the DWL-8610AP Access Point to further its commitment to product quality and long-term customer confidence. Centralized Management Centralized Firmware Dispatch Visualized AP Management Tool Auto-Power Adjustment Dynamic Auto-Channel Selection L2 Fast Roaming L3 Fast Roaming Captive Portal WEP/WPA/WPA2 Security Rogue AP Detection Rogue AP Mitigation WIDS Station Isolation MAC Address Filtering AP Load Balancing Setup WDS AP Clustering QoS/WMM View Neighboring AP information Configuration Push Standalone Mode √ √ √ √ Managed Mode3 √ √ √