D-Link DWL-AG520 Product Manual - Page 35
I cannot connect to the Access Point or the wireless Router. - driver
View all D-Link DWL-AG520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Troubleshooting 2. I cannot connect to the Access Point or the wireless Router. Make sure that the SSID on the DWL-AG520 PCI adapter is exactly the same as the SSID on the Access Point or wireless Router. Move the DWL-AG520 and Access Point or wireless Router into the same room and then test the wireless connection. Disable all security settings. (WEP, MAC Address Control, AES) Make sure that the Access Point/Router is not locked down to a different frequency Turn off your Access Point and the computer with the DWL-AG520. Turn on the Access Point, and then turn on the computer with the DWL-AG520. Refresh the DWL-AG520 Utility 3. The DWL-AG520 Power and Link lights are not on. Check to see if the DWL-AG520 PCI adapter is firmly inserted into the PCI slot of your desktop computer. 4. I forgot my Encryption key. Reset the Access Point to its factory default settings and restore the DWL-AG520 Wireless PCI Adapter to the factory default settings. 5. The computer does not recognize the DWL-AG520 Wireless Adapter. Make sure that the DWL-AG520 Wireless Adapter is properly seated in the computer's PCI slot. If Windows does not detect the hardware upon insertion of the adapter, make sure to completely remove drivers that were previously loaded. To remove the drivers, do the following: 35