D-Link DWL-G800AP Product Manual - Page 41
The wireless client cannot access the Internet in the Infrastructure - d link firmware
![]() |
UPC - 790069262050
View all D-Link DWL-G800AP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Troubleshooting (continued) 2. The wireless client cannot access the Internet in the Infrastructure mode (continued). If you are using the DWL-G800AP to repeat the wireless signal, check that the Ethernet MAC address of the wireless router or access point is entered properly in the settings. Please note that the Repeater function is compatible with the following D-Link devices: 1 D-Link AirPlus Xtreme GTM DI-624 Wireless Router - Firmware 2.37 (Rev. C) or newer. 2 D-Link AirPlus Xtreme GTM DWL-2000AP Wireless Access Point Firmware 1.56 (Rev. A), 2.06 (Rev. B) or newer. 3 D-Link AirPlus Xtreme GTM DWL-G800AP Wireless Range Extender. If you wish to repeat a device that is not a D-Link product, please check the FAQs for supported products on the D-Link support website (http:// support.dlink.com) to make certain that the device can be repeated by the DWL-G800AP. 3. Check that the drivers for the network adapters are installed properly. You may be using different network adapters than those illustrated here, but this procedure will remain the same, regardless of the type of network adapters you are using. Go to Start > My Computer > Properties Select the Hardware tab Click Device Manager 41
![](/manual_guide/products/dlink-dwlg800ap-product-manual-5e682e8/41.png)