D-Link DWL-G810 Product Manual - Page 11
Web Configuration - default ip
UPC - 790069262043
View all D-Link DWL-G810 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Web Configuration Requirements for using the DWL-G810's Web Configuration Utility If you are incorporating the DWL-G810 into a network that contains all D-Link devices, you do not need to use the Web Configuration utility. With its default settings, the DWL-G810 will connect with other D-Link 802.11b or 802.11g devices that are set to their default settings, with no configuration needed! If your network contains devices other than D-Link devices, or if you wish to configure the DWL-G810, you will need to do the following before using the Web Configuration Utility: You will need a JavaScript-enabled web-browser such as the Internet Explorer 6.0 or later, or the Netscape Navigator 6.0 or later. The computer that you are using for initial configuration must have an IP address within the same range as the IP address of the DWL-G810. The DWL-G810 has a default IP address of 192.168.0.30 with a subnet mask of 255.255.255.0 You will need to assign a static IP address to the computer that you are using to configure the DWL-G810, within the IP address range of the DWL-G810. For example, you can assign a static IP address of 192.168.0.2 with a subnet mask of 255.255.255.0 to the computer you will use for configuration. (Please refer to the Appendix section of the Quick Installation Guide.) Factory Default Settings for the DWL-G810 Operating Mode: SSID: Channel: Transmission rates: Encryption: Administrator Password: IP Address Mode: IP Address: IP Subnet: username: Infrastructure default 6 Auto No Blank (no password needed) Static 192.168.0.30 255.255.255.0 admin 11