D-Link E15 User Manual - Page 19
Wireless Setup Wizard
![]() |
View all D-Link E15 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Section 3 - Configuration Wireless Setup Wizard The setup wizard is designed to guide you through a step-by-step process to configure your new E15 to extend your wireless network and connect to the Internet via a wireless setup process. To set your E15 using an Ethernet cable, please refer to "Access Point Mode Settings" on page 22. To access the setup utility on your PC, first connect to the E15 wirelessly using the Wi-Fi name (SSID) and password located on the back of your E15. Then open a web browser and enter http://XXXX.devicesetup.net/ in your browser's URL field (where "xxxx" are the last four digits of the E15's MAC address). If this is your first time logging in to the extender and no connection has been established, the setup wizard will automatically appear. If the setup process was not previously completed, then enter the default device password printed on the device label on the back of the E15 Note: The Wi-Fi name (SSID), Wi-Fi password, web configuration address, and device password are printed on the device label on the back of the device. D-Link E15 User Manual 16
![](/manual_guide/products/dlink-e15-user-manual-5591807/19.png)