D-Link GO-SW-5GE Specifications - Page 3

GO-SW-5GE & GO-SW-8GE 5/8 Port Gigabit Metal Desktop Switch Technical Specifications GO-SW-5GE GO-SW-8GE Switching Fabric Standards Data Transfer Rates Packet Filtering/Forwarding Rates Network Cables Media Interface Exchange LED Indicators Switching Method MAC Address Table RAM Buffer Jumbo Frames QoS General Specifications DC Input Power Consumption Heat Dissipation MTBF Operating Temperature • 10Gbps • 16Gbps • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) • IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper) • Ethernet: - 10 Mbps (half duplex), 20 Mbps (full duplex) • Fast Ethernet: - 100 Mbps (half duplex), 200 Mbps (full duplex) • Ethernet: 14,880 pps • Fast Ethernet: 148,800 pps • ANSI/IEEE 802.3 NWay auto-negotiation • IEEE 802.3x Flow Control • IEEE 802.1p QoS • IEEE 802.3az Energy-Efficient Ethernet (EEE) • Gigabit Ethernet: -2000 Mbps (full duplex) • Gigabit Ethernet: 1,488,000 pps • 10BASE-T: - UTP CAT 3, 4, 5/5e (100 m max.) - EIA/TIA-586 100-ohm STP (100 m max.) • 100BASE-TX, 1000BASE-T: - UTP CAT 5/5e (100 m max.) - EIA/TIA-568 100-ohm STP (100 m max.) • Auto MDI/MDIX adjustment for all ports • Per port: Link/Activity/Speed • Store-and-forward • 2K entries • 128KB per device • 9,000 Bytes • 4 Queues, strict mode • Per device: Power • 8K entries • External 5 V/1 A Level "V" Power Adapter • Power On (Standby): DC input: 0.5 watts AC input: 1.0 watts • Maximum: DC input: 2.01 watts AC input: 3.10 watts • Power On (Standby) AC input: 3.41 BTU/h • Maximum DC input: 6.854 BTU/h • 1,688,338 hours • 32 to 130 ˚F (30 to 50 ˚C) • Power On (Standby): DC input: 0.55 watts AC input: 1.0 watts • Maximum: DC input: 2.8 watts AC input: 4.5 watts • Power On (Standby) AC input: 3.41 BTU/h • Maximum DC input: 9.548 BTU/h • 2,053,751 hours