DELPHI SA10201 User Guide - Page 4
What's in the Box, Setting up the Delphi Audio System - power supply for
UPC - 689604163528
View all DELPHI SA10201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
What's in the Box Your Delphi Audio System Kit contains the following components: 12V DC adaptor Battery compartment and antenna cable storage 12V DC jack XM Antenna Setting up the Delphi Audio System Set up your Delphi Audio System by following these steps: 1. Connect the supplied 12V DC power adaptor to the jack on the rear of the Delphi Audio System, and the other end to a wall outlet. 2. Connect the XM Antenna to the antenna jack located inside the battery compartment and antenna cable storage located on the bottom of the Delphi Audio System. The cover must first be removed by pressing down on the two tabs with your thumbs and then sliding it away from the front of the Delphi Audio System. The antenna cable can either be completely wound around the two cable hooks in the compartment, leaving just enough cable to attach the antenna to the four tabs on the back of the Delphi Audio System, or the entire 20' cable can be used to position the antenna away from the Delphi Audio System for better reception. To reattach the panel, line up all six tabs and then slide the panel toward the front of the unit until a click is heard. Make certain that all six tabs are engaged and the rear of the panel is aligned with the rear cover. 4