DIRECTV RC65RBK User Manual - Page 11
Programming To Control Your Tv, Programming The Tv Input Key, Deactivate The Tv Input Select Key - remote from
View all DIRECTV RC65RBK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
PROGRAMMING TO CONTROL YOUR TV Now that you have successfully programmed the new DIRECTV remote to operate your DIRECTV Receiver, you will want to program this remote to control your TV. 1. Turn the TV on. NOTE: Please read steps 2-5 completely before proceeding. Highlight or write down the codes and component you wish to program before moving on to step 2. 2. Locate the 5-digit code for your TV (see pages 13-16). 3. Move the slide switch to TV. 4. Press and hold in the MUTE and SELECT keys at the same time until the green light under the TV icon flashes twice and then release both keys. 5. Using the number keys enter the 5-digit code for your brand of TV. If performed correctly the green light under TV will flash twice. 6. Aim the remote at your TV and press the power key once. The DIRECTV Receiver should turn off. If it does not turn off, repeat steps 3 and 4, trying each code for your brand until you find the correct code. 7. For future reference write down the working code for your TV in the blocks below: PROGRAMMING THE TV INPUT KEY Once you have programmed the DIRECTV remote control for your TV, you may want to activate the TV Input button. 1. Move the slide switch to the position under TV icon. 2. Press and hold the MUTE and SELECT keys until the green light under the TV icon flashes twice and then release both keys. 3. Using the number keys enter in 9-6-0 (The green light under the TV icon will flash twice) You now have the ability to control the Input select feature for your TV. DEACTIVATE THE TV INPUT SELECT KEY If you want to hide the TV INPUT button, follow steps 1 through 3 from the previous section. Afterwards, the green light will blink 4 times. Pressing the TV INPUT key will now do nothing. 11