Dacor EG366SCH Installation Instructions - Page 7

Installation Requirements Cabinet/Cutout Dimensions Cabinet tolerances +1/16" -0 (+1.6 mm, 0) unless otherwise noted. 10" (254 mm) to combustible side wall Min. both sides 1/2" (13 mm) overhang, both sides B 1 1/2" (38 mm) typical countertop thickness 7 3/4" (197 mm) Cooktop platform 1" (25 mm) Min. thickness Recommended gas and electrical service location, consult local code 36" (914 mm) typical Cabinet/Countertop Dimensions - Front View 13" (330 mm) max.3 C Hood See note 2 Cooktop Model B C EG366 36" (914 mm) 36" (914mm)* 42" (1067 mm)** EG486 48" (1219 mm) 48" (1219 mm)* 54" (1372 mm)** * Minimum ** Recommended 18" (457 mm) Min.1, 3 30" (762 mm) Min.1 Top of finished counter Cutout for utility access Cabinet/Countertop Dimensions ISO View 1 Vertical to combustible surface from cooktop grate level; if installing an overhead vent hood, also check the hood specifications for minimum required clearances. 2 See Cabinet/Countertop Dimensions - Top View 3 Not applicable for cabinets more than a horizontal distance of 10" (254mm) from the edge of the cooktop. Continued on following pages... 5