Dacor EG366SCH Use & Care Manuals - Page 13

Care and Cleaning, Accessories and Replacement Parts

Page 13 highlights

Care and Cleaning Brass, Chrome and Copper Surfaces caution To prevent scratching, do not use abrasive cleaners or scrubbers on metal surfaces. Using a soft cloth, clean metal surfaces with a mild solution of detergent and warm water. Rinse and dry with a soft, lint-free cloth. Knobs and Trim Rings warning Never block the holes in the control panel behind the knobs. Doing so will impair the flow of combustion air and adversely affect burner operation, possibly creating a hazardous condition. To prevent damage, do not expose the knobs to direct flame, hot utensils or other sources of heat. • Turn the knobs to the off position before removing them for cleaning or replacement. • To remove the knobs, gently grasp each knob and pull straight out, off of the valve shaft. • Wash the knobs regularly with a solution of warm soapy water. Dacor recommends hand dishwashing liquid. • Clean the outside edges of the trim rings while the knobs are removed. Do not remove the trim rings. Wipe them with a soft damp rag. Use caution to avoid getting moisture into the control panel behind the trim rings. • To replace the knobs, align the "D-shaped" opening on the back of the knob with the end of the valve shaft. Carefully push the knob on until it stops. Make sure you put the two knobs with the words MAX GRIDDLE on the two valve stems closest to the center. Cleaning the Griddle Clean the griddle after each use. Wash it thoroughly in hot soapy water to avoid stains from grease build-up. The griddle is coated with a non-stick coating for easy cleaning. Warm water and liquid detergent are all that are needed for cleaning. Remove stubborn spots with a non-abrasive plastic mesh pad. To prevent scratching, do not use abrasives or abrasive cleaners. Use the soft side of a sponge to scrub it. Dry it with a lint-free cloth. Accessories and Replacement Parts Description Dacor Part Number Dacor Stainless Steel Cleaner Wok ring Griddle A302 AWR4 AG1424 Grill 9 inch backguard, model EG366 9 inch backguard, model EG486 AEGR3648 AEB3609 AEB4809 12 inch backguard, model EG366 12 inch backguard, model EG486 Trim kit, black chrome, model EG366 and EG486 Trim kit, brass, model EG366 and EG486 Trim kit, copper, model EG366 and EG486 10" grate, model EG366 only (2 used per unit) 14" grate, model EG366 (1 used per unit) and EG486 (3 used per unit) AEB3612 AEB4812 AEGTK6BC AEGTK6BR AEGTK6CP 700037 700038 To order parts and accessories, contact your Dacor dealer or visit www.everythingdacor.com. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

11
Brass, Chrome and Copper Surfaces
CAUTION
To prevent scratching, do not use abrasive cleaners or
scrubbers on metal surfaces.
Using a soft cloth, clean metal surfaces with a mild
solution of detergent and warm water. Rinse and dry
with a soft, lint-free cloth.
Knobs and Trim Rings
WARNING
Never block the holes in the control panel behind the
knobs. Doing so will impair the flow of combustion air
and adversely affect burner operation, possibly creating a
hazardous condition.
To prevent damage, do not expose the knobs to direct
flame, hot utensils or other sources of heat.
Turn the knobs to the off position before remov-
ing them for cleaning or replacement.
To remove the knobs, gently grasp each knob
and pull straight out, off of the valve shaft.
Wash the knobs regularly with a solution of
warm soapy water. Dacor recommends hand
dishwashing liquid.
Clean the outside edges of the trim rings while
the knobs are removed. Do not remove the trim
rings. Wipe them with a soft damp rag. Use cau-
tion to avoid getting moisture into the control
panel behind the trim rings.
Care and Cleaning
Accessories and Replacement Parts
To replace the knobs,
align the “D-shaped”
opening on the back
of the knob with
the end of the valve
shaft. Carefully push
the knob on until it
stops. Make sure you
put the two knobs
with the words
MAX
GRIDDLE
on the two
valve stems closest to the center.
Cleaning the Griddle
Clean the griddle after each use. Wash it thoroughly
in hot soapy water to avoid stains from grease
build-up. The griddle is coated with a non-stick coat-
ing for easy cleaning. Warm water and liquid deter-
gent are all that are needed for cleaning. Remove
stubborn spots with a non-abrasive plastic mesh
pad. To prevent scratching, do not use abrasives or
abrasive cleaners. Use the soft side of a sponge to
scrub it. Dry it with a lint-free cloth.
Description
Dacor Part Number
Dacor Stainless Steel Cleaner
A302
Wok ring
AWR4
Griddle
AG1424
Grill
AEGR3648
9 inch backguard, model EG366
AEB3609
9 inch backguard, model EG486
AEB4809
12 inch backguard, model EG366
AEB3612
12 inch backguard, model EG486
AEB4812
Trim kit, black chrome, model EG366 and EG486
AEGTK6BC
Trim kit, brass, model EG366 and EG486
AEGTK6BR
Trim kit, copper, model EG366 and EG486
AEGTK6CP
10” grate, model EG366 only (2 used per unit)
700037
14” grate, model EG366 (1 used per unit) and EG486 (3 used per unit)
700038
To order parts and accessories, contact your Dacor dealer or visit www.everythingdacor.com.