Dacor EORD227 Planning Guides - Page 1

EOR, MOR Document # PG01-004 27", 30", 36" Wide, Double, Renaissance® Wall Ovens Revised 10/01/11 Page 1/2 PLANNING GUIDE All tolerances: ±1/16" (±1.6 mm) unless otherwise stated Top of L chassis B* J Utility F cutout G WARNING • Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information. • This appliance must be installed in accordance with the accompanying installation instructions. C Control panel front Chassis Notch Side View A K E M Light cover Light cover Top of chassis H D Model (A) Overall (B)* Chassis (C) Overall Number Width Width Height EORX227/ MORX227 EORX230/ MORX230 26 7/8" (68.3 cm) 29 7/8" (75.9 cm) 25 3/8" (64.5 cm) 28 3/8" (72.1 cm) 49 15/16" (127.0 cm) (D)** Chassis Height (E) Control Panel Overlay 49 1/16" (124.6 cm) 7/8" (2.2 cm) X = Number of convection ovens: S = single, D = double * Width at light covers on sides ** To top of chassis notch behind control panel Conduit: 60" (152 cm) Long Model Number Dedicated Circuit Requirements Total Connected Load EORS227/ MORS227 EORS230/ MORS230 240 Vac 60 Hz, 4-wire***, 40 Amp. 7.8 kW (33 Amp.) EORD227/ MORD227 EORD230/ MORD230 240 Vac 60 Hz, 4-wire***, 50 Amp. 10.0 kW (42 Amp.) *** Two 120 Vac hot (L1 and L2), one neutral, one ground The above specifications are for reference only. See the appliance data plate for exact specifications. All models (F) Utility Cutout Width 5" (12.7 cm) (G) Utility Cutout Height 5 ¼" (13.3 cm) (H) Utility Cutout Depth 6" (15.2 cm) (J) Control Panel Depth 1" (2.5 cm) (K) Notch Depth 1 1/8" (2.9 cm) (L) Chassis Depth 24" (61.0 cm) (M) Notch Height 1" (2.5 cm) 3 3/8" (8.6 cm) 1" (2.5 cm) 1" (2.5 cm) HANDLE DIMENSIONS Epicure Millennia (Handle is integral) Specifications subject to change without notice. www.dacor.com 21 1/8" Phone: (800) 7913-.010193