Dacor EORS136 Use & Care Manuals - Page 29

Care and Cleaning Replacing the Light Bulbs warning • To prevent electrical shock and/or personal injury, make certain that the oven and light bulb(s) are cool and that power to the oven has been turned off at the main power supply before replacing the light bulb(s). • Always make sure the lens covers are in place when using the oven(s). The lens covers protect the light bulbs from breakage caused by high oven temperatures or mechanical shock. • Replacing the lens cover without lining up the cut-out with the light socket will damage the light fixture. • Do not use a screwdriver to remove the lens. Light bulb replacement is considered to be a homeowner maintenance operation. If the lights do not work, before replacing them, please consult the Problem Solution Guide on page 29. important Do not touch the replacement halogen light bulbs with your fingers. Halogen bulbs are sensitive to the oils from your hand. The oils from your hand will stick to the bulb and cause it to burn out faster than normal. To replace the light bulbs... 1. Replace the light bulb only with Dacor part number 100429. See the page 28 for ordering information. 2. Turn off power to the oven at the circuit breaker panel or fuse box. 3. Hold your hand under the lens for support and gently pry it loose using a spatula or table knife. Pull the lens cover straight out. 4. Grasp the old bulb and pull it straight out of the socket. 5. Using a glove, insert the new bulb into the socket. 6. As you reinstall the lens cover, line up the cutout on the inside rim with the light socket. Gently press it into its original position. 7. Turn the power to the oven back on at the main power supply. 8. Reset the clock (see page 8). Light bulb Light socket Cutout on inside rim of lens 27