Dacor ER48D Planning Guides - Page 3

Document # PG08-001 ERV30, ERV36, ERV48, PRV30, PRV36, PRV46 30", 36", 46", 48" Wide, Slim Raised Vent All tolerances: ±1/16" (±1.6 mm) unless otherwise stated Exhaust outlet location options side view front view Revised 03/29/10 Page 3/3 PLANNING GUIDE 26" (660 mm) 1 1/8" (29 mm) 6 1/4" CL (159 mm)     Front of unit Motor  cover CL   3"  CL   Rear Exhaust Knock Out (3 1/4" X 10")  Vertical center line of rear exhaust knock out lines up with vertical center line of chassis  Bottom Exhaust Knock Out (1 5/8" X 16")  On 46" and 48" wide models, the vertical center line of bottom knock- out lines up with vertical center line of chassis  On 30" and 36" wide models, the vertical center line of bottom knock- out is offset 3"  Side Exhaust Knock Outs (1 5/8" X 16") 5" (127 mm) 2" X 16", connects to side or bottom exhaust on raised vent 1" (25 mm) 3 1/4" X 10" to duct work ADT2 transition (included) NOTE: See the appliance planning guide page for cutout dimensions Front of unit Blower wiring access hole in side Blower wiring access hole in bottom Wiring/conduit connections for rEmote/in-line blower Specifications subject to change without notice. Install all appliances according to accompanying installation instructions. www.Dacor.com Phone: (800) 793-0093 8.3